Chapter 4: Commands for CLI configuration
140
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
Default:
0
Usage Guide:
To configure width of the display terminal.
Example:
To configure width (50) of the display terminal for
vty 1.
Switch# configure terminal
Switch (config)#
line vty 1
Switch (config-line)#
width 50
lldp holdtime
Command:
lldp holdtime <2-10>
lldp
LLDP configurations.
holdtime
Sets LLDP hold time (The neighbor switch will discarded the LLDP
information after "hold time" multiplied with "timer" seconds ).
<2-10>
2-10 seconds
Default:
4
Usage Guide:
To enable
LLDP hold time
Example:
To enable
LLDP hold time
(5)
Switch# configure terminal
Switch (config)#
lldp holdtime 5
lldp med datum
Command:
lldp med datum nad83-mllw | nad83-navd88 | wgs84
lldp
LLDP configurations.
med
Media Endpoint Discovery
datum
Datum (geodetic system) type
nad83-mllw
Mean lower low water datum 1983
nad83-navd88
North American vertical datum 1983
wgs84
World Geodetic System 1984
Default:
WGS84
Usage Guide:
To configure
Datum type
of
LLDP
Example:
To configure
Datum type (nad83-mllw)
of
LLDP
