NX-1700E Card Reader
13
LOC
PG
DESCRIPTION
DEFAULT
YOUR DATA
242
8
Seg 3
LED2 (RED) OPTIONS
1
1 =
"On" follows system Armed status
2 =
"On" to toggle with the Open Collector output
3 =
"On" if inverted
4 =
4-8= Reserved.
Seg 4
READER PARTITION
1,2,3,4,5,6,7,8
1 =
"On" if reader is in Partition 1
2 =
"On" if reader is in Partition 2
3 =
"On" if reader is in Partition 3
4 =
"On" if reader is in Partition 4
5 =
"On" if reader is in Partition 5
6 =
"On" if reader is in Partition 6
7 =
"On" if reader is in Partition 7
8 =
"On" if reader is in Partition 8
243
9
PROGRAMMING THE ZONES
Seg 1
Door Shunt Zone
0 = Disabled
Seg 2
Request To Exit (RTE)
0 = Disabled
244
9 READER
TIMES
Seg 1
Scan Time (1/100 seconds)
100 = 1 second
Seg 2
Relay Active Time (seconds)
10 = 10 seconds
Seg 3
Door Fault Warning Time (seconds)
30 = 30 seconds
Seg 4
Door Fault Alarm Time (seconds)
0 = Disabled
245
9
RESET THE READER ADDRESS
Entering a “0” will reset and cause the reader to cease
functioning.
246
9
PROGRAMMING THE ACCESS OPTIONS
Seg 1
DOOR OPTIONS
1 =
"On" if locking mechanism is a Maglock or Drop Bolt.
2 =
"On" if access is allowed regardless of Armed status of the system.
3 =
"On" if the door is not to be latched unlocked during an open schedule.
4 =
"On" if onboard open collector output only triggers during an open schedule.
5 =
“On” if onboard open collector output only triggers during a close schedule.
6 =
“On” if Forced Entry Alarm is logged.
7 =
“On” if access allowed without an RTE.
8 =
“On” if relay operates normally during off-schedule (
outside of regular operating hours
).
Seg 2
SCHEDULES FOR ONBOARD OPEN COLLECTOR OUTPUT
1 =
"On" if driver follows Schedule 1.
2 =
"On" if driver follows Schedule 2.
3 =
"On" if driver follows Schedule 3.
4 =
"On" if driver follows Schedule 4.
5 =
"On" if driver follows Schedule 5.
6 =
"On" if driver follows Schedule 6.
7 =
"On" if driver follows Schedule 7.
8 =
"On" if driver follows Schedule 8.
Seg 3
MORE DOOR OPTIONS
1 =
“On” if egress input is to be disabled.
2-8 = Reserved.
247
10
OPENING TIME FOR SCHEDULE 1
Seg 1
Hour of Opening Time (24-hr format)
8 = 8 AM
Seg 2
Minutes after Hour of Opening
0
248
10
CLOSING TIME FOR SCHEDULE 1
Seg 1
Hour of Closing Time (24-hr format)
20 = 8 PM
Seg 2
Minutes after Hour of Closing
0
249
10
DAYS FOR SCHEDULE 1
1 =
"On" if schedule is active on Sunday.
2 =
"On" if schedule is active on Monday.
3 =
"On" if schedule is active on Tuesday.
4 =
"On" if schedule is active on Wednesday.
5 =
“On” if schedule is active on Thursday.
6 =
“On” if schedule is active on Friday.
7 =
“On” if schedule is active on Saturday.
8 =
“On” if schedule is disabled on holidays.
250
10
OPENING TIME FOR SCHEDULE 2
Seg 1
Hour of Opening Time (24-hr format)
8 = 8 AM
Seg 2
Minutes after Hour of Opening
0
251
10
CLOSING TIME FOR SCHEDULE 2
Seg 1
Hour of Closing Time (24-hr format)
20 = 8 PM
Seg 2
Minutes after Hour of Closing
0
