![background image](http://html.mh-extra.com/html/interlogix/iti-simon/iti-simon_owners-manual_2077292012.webp)
8
How to Use Your Touchpads
Touchpads are used to control the security system from any location within or near your home. They have additional home control
features such as light and appliance control.
When using the Touchtalk 2-Way RF Touchpad, beeps and voice feedback will be
heard from this touchpad and not from the Control Panel.
Remote Handheld Touchpad and Touchtalk 2-Way RF Touchpad
(Not for use with Basic Model)
SYSTEM STATUS
Press
once
to
hear information about your system. See “System
Tests & Trouble Beeps” on page 12.
ARM Doors & Windows
Press once to turn the security system protection on for all
protected doors and windows.
Press twice to eliminate the preprogrammed entry delay.
ARM Motion Sensors
Press once to turn protection on for all Motion Sensors. Use
when no one is home. This is usually used in combination with ARM Doors & Windows.
Press twice to activate the Latchkey feature.
DISARM
Press once and
enter your access code using the NUMERIC
buttons to turn
security protection off. To subdisarm the system, enter the master access code.
ON Light button
Press twice quickly to activate all lights controlled by the security
system. You may turn on specific lights and appliances by pressing this button once and
entering the unit number of a light or appliance using the NUMERIC
buttons.
OFF Light button
Press twice quickly to turn off all lights. You may turn off specific
lights and appliances by pressing this button once and entering the unit number of the
light or appliance.
EMERGENCY
Press both
EMERGENCY
buttons for 3 seconds to cause the system to
call a central monitoring station to report a non-medical emergency.
KeyChain Touchpad
LOCK
Press once to arm doors and windows.
LOCK
Press twice to arm doors, windows, and Motion Sensors.
LOCK
Press 3 times to arm doors, windows, Motion Sensors, and to activate the
Latchkey option.
Entering your home If your installer programmed the KeyChain Touchpad with no entry
delay, and you armed the system with the KeyChain Touchpad, you must disarm your
system from outside of the home to avoid causing an alarm.
Exiting your home You have at least 5 seconds and up to 120 seconds (depending on
installer programming) to leave without causing an alarm.
LOCK
and
UNLOCK
Press both buttons simultaneously for 3 seconds to send an
intrusion, silent, or non-medical emergency alarm to the central monitoring station.
UNLOCK
Press to disarm your security system.
LIGHT
Press to turn system controlled lights on or off.
STAR
Press to open or close your garage door, if programmed, or your system may be
programmed to turn on a light using this button.
For any keypress on the KeyChain Touchpad, hold the button until the indicator
light blinks.
8988G07B.DS4
7
4
1
8
9
5
2
6
3
Off
s
P
EMERGENCY
On
d
&
s
re s
Hol
h
B t
o
e
K y
DISARM
SYSTEM
STATUS
Doors &
Windows
ARM
ARM
Sensors
Motion
-