Interlogix IFS NS2503-24P/2C User Manual Download Page 53

Page: 53 / 206

User’s Manual of NS2503-24P/2C

4.2.8 Firmware Upgrade

It provides the functions allowing the user to update the switch firmware via the

Trivial File Transfer Protocol (TFTP)

server.

Before updating, make sure the TFTP server is ready and the firmware image is located on the TFTP server.

4.2.8.1 TFTP Firmware Upgrade

The

Firmware Upgrade

page provides the functions to allow a user to update the Managed Switch firmware from the TFTP

server in the network. Before updating, make sure you have your TFTP server ready and the firmware image is on the TFTP
server. The screen in

Figure 4-2-16

appears.

Use this menu to download a file from specified TFTP server to the Managed Switch.

Figure 4-2-16:

Firmware Upgrade Interface Screenshot

The page includes the following fields:

Object

Description

TFTP Server IP Address:

Type in your TFTP server IP.

Firmware File Name:

Type in the name of the firmware image file to be updated.

Apply

Press this button to take affect.

Help

Press this button for Firmware Upgrade information.

Summary of Contents for IFS NS2503-24P/2C















































































































































































































Search results

Summary of Contents for IFS NS2503-24P/2C

Reviews:

Related manuals for IFS NS2503-24P/2C

Brands by name

Popular brands

Interlogix IFS NS2503-24P/2C, User Manual

Search results

Summary of Contents for IFS NS2503-24P/2C

Reviews:

Related manuals for IFS NS2503-24P/2C

Brands by name

Popular brands