User’s Manual of NS2503-24P/2C
119
Non-IPv4 ACL
In
※
Packet Type / Binding box should select Non-IPv4
Object
Description
Default Vaule
Group ID
1 ~ 200
Action
Permit / Deny.
Permit
: Permit packet cross switch.
Deny
: Drop packet.
Permit
VLAN
Any / VID.
Any
: Any VLAN ID.
VID
: 1~4094. A certain VLAN ID.
Any
Packet Type
IPv4 / Non-IPv4 / Binding
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
IPv4
Ether Type
Set this field if Packet Type is Non-IPv4, else ignore.)
Any / ARP(0x0806) / IPX(0x8137)
Any
Type
Set this field if Packet Type is Non-IPv4, else ignore.)
0~0xFFFF
If ether type not find in Ether Type field, you can direct assign
number.
Current List
Creates ACL and Binding groups.
Binding
Let device that has specific IP address and MAC address can use network. We can set specific IP address, MAC address,
VLAN id and port id to bind, and device can cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In
※
Packet Type / Binding box should select
※
Binding.
Object
Description
Default Vaule
Group ID
1 ~ 200
Action
Permit / Deny.
Permit: Permit packet cross switch.
Deny: Drop packet.
Permit
VLAN
Any / VID.
Any: Any Vlan id.
VID: 1~4094. A certain vlan id.
Any
Packet Type
IPv4 / Non-IPv4 / Binding
IPv4: Set Ipv4 packet field.
Non-IPv4: Set non-Ipv4 packet field.
Binding: Set binding entry.
IPv4
MAC Address
**:**:**:**:**:**
* is represent a digit from 0~9 and A~F,
*** is range from 0 to FF.
00:11:22:33:44:55
IP Address
***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255.
0.0.0.0
Port Id
Source port id, from 1~10.
1
Current List
You create ACL and Binding groups.
