© 2015 United Technologies Corporation. All rights reserved.
P/N 1073029-EN
• REV
A
• ISS
03JUN15
Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation.
All rights reserved.
TruVision IP PTZ Camera FW5.1 Installation
Guide
Introduction
This installation
guide provides basic information on setting up
and using the c
amera
.
Detailed information on the cameras
can be found in the configuration manual.
Product overview
This is the installation guide
for following TruVision IP PTZ
camera models:
TVP
-1101 (1.3 MPX pendant, 20X, PAL)
TVP
-3101 (1.3 MPX pendant, 20X,
NTSC)
TVP
-1102
(1.3 MPX surface, 20X, PAL)
TVP
-3102 (1.3
MPX surface, 20X, NTSC)
TVP
-1103 (1.3
MPX flush, 20X, PAL)
TVP
-3103 (1.3
MPX flush, 20X, NTSC)
TVP
-1104 (2 MPX pendant, 20X, PAL)
TVP
-3104
(2 MPX pendant, 20X, NTSC)
TVP
-1105 (2 MPX
surface, 20X, PAL)
TVP
-3105
(2 MPX surface, 20X, NTSC)
TVP
-1106
(2 MPX flush, 20X, PAL)
TVP
-3106
(2 MPX flush, 20X, NTSC)
TVP
-1107 (2 MPX pendant, 30X, PAL)
TVP
-3107
(2 MPX pendant, 30X, NTSC)
TVP
-1122
(2 MPX pendant, 30X, IR, PAL)
TVP
-3122 (
2 MPX pendant, 30X, IR, NTSC)
Before you begin
Unpack everything. Check
the
items
for damage, and verify
that all items are included.
The camera is shipped with the
following items:
Dome camera
Installation
Guide
CD with the Configuration Manual and
Device Manager
Installation environment
When installing your camera, consider these factors:
•
Place the camera in a secure location.
•
Ensure that the camera is in a well
-ventilated area.
•
Do not expose the camera to rain or moisture.
Caution
: Risk of explosion if
the
battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
Camera description
Figure 1: Overview of the dome camera (pendant-mount shown)
TVP-1122/3122 cameras only:
1.
Power supply cord
Connect 24 VAC power supply
2.
Video output
Connect the BNC connector to a
CCTV monitor
3.
Ethernet RJ45 connector. Connect
to the network devices
Connect to the PoE+ switch
4.
Alarm input/outputs and
audio in/out port
5.
Housing
6.
Bubble
7.
Metal housing
8.
IR LEDs
9.
Camera
