![background image](http://html.mh-extra.com/html/interlogix/adc-is-300-lp/adc-is-300-lp_installation-manual_2076681009.webp)
11. The Image Sensor LED will alternate between green and yellow while the customer’s device list is updated with
Alarm.com. The LED will turn solid green when the Image Sensor has been successfully added to the customer’s
account. Note: If you move (tamper) the Image Sensor after the LED has turned solid green, the Image Sensor will
enter test mode for 3 minutes indicated by red LED when motion is detected. You may continue with the mounting
portion of the installation when in test mode. See the Image Sensor LED Reference Chart for more details.
Image Sensors may be enrolled in groups 15, 17, 20, or 25. The Image Sensors must follow the partition and group of
the alarm hardwire and cannot be individually configured. After enrollment, be sure to keep the sensor and panel
powered so the sensor can complete an initialization process with the Alarm.com Network Operations Center. This
process will take several minutes. Images cannot be captured until initialization is complete. Check by verifying if the
rules are confirmed on the dealersite or MobileTech.
INSTALLATION: MOUNTING IMAGE SENSOR
1. Determine the desired mounting angle – 3 options
https://answers.alarm.com/Installation_and_Troubleshooting/Image_Sensor/Interlogix_Simon_XTi_Image_Sensor/Interlogix_Simon_XTi_Image_Sensor_Installation_Guide_-_ADC-IS-300-LP
Updated: Tue, 17 Apr 2018 13:48:15 GMT
9