background image

 

P/N 466-

5410 (EN) • REV D • ISS 19MAR18 

 

7 / 8 

measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment 
and receiver. 

- Connect the equipment into an outlet on a circuit 
different from that to which the receiver is 
connected. 

- Consult the dealer or an experienced radio/TV 
technician for help. 

This Class B digital apparatus complies with 
Canadian ICES-003. 

Cet appareil numérique de la classe B est 
conforme à la norme NMB-003 du Canada. 

Conforms to: 

UL 985 Household Fire Warning System Units  

UL 1023 Household Burglar-Alarm System Units  

UL1610 Central Station Burglar-Alarm Units 
(Commercial Burglary)  

ULC C1023 Preliminary Standard for Household 
Burglar Alarm 

ULC S545 Standard For Residential Fire Warning 
System Control Units 

Warranty Information 

MANUFACTURER HEREBY DISCLAIMS ALL WARRANTIES 
AND REPRESENTATIONS, WHETHER EXPRESS, IMPLIED, 
STATUTORY OR OTHERWISE INCLUDING (BUT NOT 
LIMITED TO) ANY WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE WITH 
RESPECT TO ITS CONCORD 4 PRODUCTS AND RELATED 
SOFTWARE. MANUFACTURER FURTHER DISCLAIMS ANY 
OTHER IMPLIED WARRANTY UNDER THE UNIFORM 
COMPUTER INFORMATION TRANSACTIONS ACT OR 
SIMILAR LAW AS ENACTED BY ANY STATE. 

(USA only) SOME STATES DO NOT ALLOW THE 
EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE 
EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY 
GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY 
ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM 
STATE TO STATE. 

MANUFACTURER MAKES NO REPRESENTATION, 
WARRANTY, COVENANT OR PROMISE THAT ITS 
SECURITY PRODUCTS AND/OR RELATED SOFTWARE (I) 
WILL NOT BE HACKED, COMPROMISED AND/OR 
CIRCUMVENTED; (II) WILL PREVENT, OR PROVIDE 
ADEQUATE WARNING OR PROTECTION FROM, BREAK-
INS, BURGLARY, ROBBERY, FIRE; OR (III) WILL WORK 
PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS.

 

Contact Information

 

For general information, see www.interlogix.com. For 
customer/technical support, see www.interlogix.com/customer-
support or call +1 855 286 8889. 

© 2018 UTC Fire & Security Americas Corporation, Inc. 
Interlogix is part of UTC Building and Industrial Systems, a unit 
of United Technologies Corporation. All rights reserved. 

 

 

Summary of Contents for 60-924-3-C4TS5









Reviews: