8
5. Naw, put the upper part of the filter or valve as well as the
joint on the upper edge of the filter. The connection
between the upper part of the filter or valve is made with
the collar. The collar is secured with a screw and a nut.
(see drawings 5 & 6)
6. Connect the pipe with the pump and valu properly.
(Drawing 7&8).
Finally, put the pieces to connect the filter to the valve. Make
the joints watertight with PTFE tape.
6 CONNECTION OF HOSEPIPES TO THE
PUMP
1. Skimmer Circuit: Connecting the skimmer to the
connection in front of the pump.
2. Vacuum hosepipe: Joining the upper connection of the
pump to the connection designated ‘PUMP’ on the valve.
3. Return hosepipe: Joining the valve connection designated
‘RETURN’ ‘ a la connection to the inlet connector of the
pool. Secure all the connections with metal clips.
4. Wastewater hosepipe: Joining ‘COUNTERWASH’ to the
hosepipe or to the lawn. The connection is made with the
hosepipe of the pool and specific metal clips!
EN
