inside this appliance.
Do not use any electrical appliances inside the refrigerated compartment of this appliance.
Do not use any mechanical devices or other means to accelerate the defrosting process.
Defrosting is performed automatically by the electronic controller and needs no user
intervention.
the insulation foam. As such it is mandatory that the cabinet is serviced and, at
end-of-life, recycled by a professional organisation and skilled persons who have
consult your Local Authority or contact
us
.
The appliance uses LED lighting. The lighting strips and transformer should only be
During all operations, please be careful not to jolt, jar, bump or thump the cabinet.
Handle it gently and with care. The refrigeration pipework is delicate and will be
damaged by rough handling.
Do not exceed the maximum shelf loading weight of 25 kgs per shelf so as to avoid
injury or damage.
Never move or tilt the appliance whilst the power switch is in the “ON” position.
Do not damage the refrigeration circuit. If you do so, then open a window or door
The appliance must always be earthed.
1
.
2
Unpacking and positioning (before connecting to the power supply)
During all operations, please be careful not to jolt, jar, bump or thump the cabinet.
Handle it gently and with care. The refrigeration pipework is delicate and will be
damaged by rough handling.
The appliance is heavy and therefore please carry out a risk assessment prior to
beginning this operation.
Please cut the banding straps taking the necessary precautions to avoid hurting
yourself or others. Remove all of the packaging and ensure that it is recycled in
The appliance must only be charged with R600a refrigerant from an authorised supplier.
To use another type of refrigerant would be dangerous and is not permitted under any
circumstances.
Electrical equipment should not be placed under the unit or where refrigerant could
gather in the event of a leak.
If it is necessary to repair the refrigeration such that it needs to be opened or charged,
then it will be necessary for the technician to possess a Gas Work Authorisation
(hydrocarbon refrigerants). Queensland, Australia has particular regulations for such
activities.
The electrical wiring diagram is to be found on the appliance itself and is located inside
the cabinet on the side wall.
4
replaced using genuine parts of the same technical specification.
