background image

vi

For information on the Windows NT Workstation 4.0 operating system, refer to the printed
and online Microsoft documentation delivered with the system:

For basic information on installing and using Windows NT, refer to  Start Here.

For detailed information on using Windows NT, refer to Windows NT Help.

For information on installing and using Truevision’s Targa 2000 DTX or Targa 2000 RTX
expansion board, refer to the documentation delivered with the product.

Getting Documentation and Training

You can purchase additional product documentation from Intergraph.

In the United States, contact your sales account representative, call the Intergraph Order
Desk at 1-800-543-1054, or send a fax to 1-800-548-3318 to place an order.  If you call
or fax the Order Desk, have the document numbers ready for the items you wish to
purchase.

Outside the United States, contact the Intergraph subsidiary or distributor from which
you purchased your Intergraph product to place an order.

To find information on training for Intergraph products, or to enroll for an available class,
contact Intergraph Training Solutions at 1-800-240-3000.

To find information on documentation and training for Truevision products, contact
Truevision.

NOTE

End-users who want information on training or documentation for Intergraph or Truevision
products should contact their value-added reseller.

Summary of Contents for TD-200 Targa 2000



















Reviews: