Intergraph InterServe 05 Setup, Setup Manual

Page: 65 / 75

52
Installing Windows NT Server 4.0
Depending on your system’s configuration, you will need some or all of the following system
software during the installation process:
u
MegaRAID Power Console driver and utilities
u
G95 video display driver
u
Sound processor driver
u
Quick-Fix Engineering (QFE) update software
NOTE If your system is equipped with an internal RAID disk array, you should select the RAID level
and configure the RAID drives as described in the
InterRAID Hardware User’s Guide.
Follow the instructions in Start Here to install Windows NT Server 4.0. As you install the
operating system:
u
Select Custom Setup.
u
Bypass automatic SCSI detection and install the Adaptec SCSI driver from the backup
diskette. If your system is equipped with an internal RAID disk array, you should also
install the MegaRAID driver from backup diskette.
u
You can safely select the default responses for other options in Setup.
u
When prompted to create an Emergency Repair Disk, do so.
After installing the operating system:
u
When prompted by Setup to restart the system, do so. When the system restarts, Phase
III, the Graphical User Interface (GUI) portion, of Windows NT Setup runs. Go through
Windows NT Setup as described in Chapter 1, “Getting Started.”
u
Configure the system as described in Chapter 2, “Configuring the System.”
u
Perform any additional installation and configuration tasks described in the Late-Breaking
News document delivered with your system.
u
You can install additional accessories for the sound processor, available from the IBBS or
from vendor bulletin boards pointed to by the IBBS.