5
Initial operation
© 2021 Interflex Datensysteme GmbH
IF-4076-0 Access Manager
19
5. Start communication with
Open
6. Log in with username
fieldservice
7. Specify a password
Details on valid password requirements and how to change a password can be found under.
Only after entering a password are the network services started and the network connection can
be established.
8. Establish network connection
After the power supply has been switched on, the device executes the following actions:
n
Boot the operating system
n
Start applications
n
Connect the devices
When the RUN LED lights up, an SSH connection can be established.
The start-up procedure takes up to 30 seconds.
Leave PuTTY open during the next steps as further entries are required during initial operation.
