The Leader in Force Measurement
INTERFACE • 7401 E. Butherus Drive, Scottsdale, AZ 85260 • PHONE: (480) 948-5555 • FAX: (480) 948-1924
www.interfaceforce.com
• Email: [email protected] •
ORDER TOLL-FREE 1-800-947-5598
JunctionBox
Rev B
05/21/18
1 Mounting the Small Junction Box
The junction box should be mounted in a location that is convenient for servicing and
away from standing water. Try to mount the enclosure in a location so that the load cell
cables need not be cut, nor length added. Load cell output is temperature
compensated for the supplied cable length. Altering that length can change the cell’s
signal output.
Depending on the mounting surface, the JB104SS enclosure can be attached using
two pan-head screws, bolts, or other suitable fasteners. Figure 1 below shows the
dimensions for mounting the enclosure
Figure 1: JB104SS Enclosure Dimensions
