7418 East Helm Drive • Scottsdale, Arizona 85260 • 480.948.5555 • www.interfaceforce.com
Oper
at
or Ins
tructions IS
TL T
ension Link v1.2 12-01-2017
Page 4 of 5
Inspection
All Interface tension link load cells should be subject to periodic inspection, which should include, but is not
exclusive to the following checks:
•
Completion of the safety checks after installation.
•
Check output at zero load (shift in zero offset). Verify against calibration certificate.
•
Inspect to see if the tension link has been damaged/worn or chemically attacked (from a corrosive
environment or lubricants etc.).
Load measuring links are designed for many diverse lifting and weighing applications.
http://www.interfaceforce.com
IF IN DOUBT ABOUT ANY ASPECT OF THE SELECTION,
INSTALLATION OR USE OF A TENSION LINK,
CONTACT INTERFACE FOR ADVICE BEFORE INSTALLING
CE Approvals
European Directive
2006/42/EC
BS-EN ISO 13849-1:2015
BS-EN ISO 13849-2:2015
WARRANTY
WARRANTY
All tension link load cell products form Interface Force Inc., ('Interface') are warranted against defective
material and workmanship for a period of (1) one year from the date of purchase.
If the 'Interface' product you purchase appears to have a defect in material or workmanship or fails during
normal use within the period, please contact your Distributor, who will assist you in resolving the problem. If it
is necessary to return the product to 'Interface' please include a note stating name, company, address, phone
number and a detailed description of the problem. Also, please indicate if it is a warranty repair.
The sender is responsible for shipping charges, freight insurance and proper packaging to prevent breakage in
transit.
