6
While repairing and maintaining the instrument must not be connected on wire netting.
Only authorized person is allowed to repair the instrument. Interdent is not responsible for
the damage, made by non-expertise repairs on the instrument.
After repairs on the electrical parts of the instrument, it should be tested again if it fits local
regulations.
6 SAFETY USAGE
To prevent stagnation of overheating, there are grids on the upper side of the instrument,
which have to be free during work. The instrument has to have safe distance from heating
devices.
With damages, which do not assure safe work anymore, the instrument should be
disconnected from wire netting and usage should be prevented, until the instrument is not
flawless.
To prevent unwanted polymerisation, you should not put synthetic materials, which can be
polymerised by light, in front of the instrument.
7 SETTING AND STARTING
Unpacking
When you are unpacking, you should make sure, that instrument is not damaged.
In case of damage, you should return the instrument to manufacturer with the bill and
supply order, which includes serial number of the instrument.
Damages, caused by incorrect transport, should immediately be laid claim to authorized
forwarding agent.
8 PLACING
The instrument should be placed on horizontal, flat and non-sliding working surface, on the
distance from heating devices. You should be careful, that there is enough room for on-off
switch and that grids for cooling polymerisation chamber are free.
Before first turning on, you should wait that the instrument heats on room temperature.
