Intercoax IXTS-160D, User Manual

Page: 11 / 63

10
6. Software Use
6.1. System Configuration
[ System configuration - device ]
•
Infrared
-
IP: the IP address of the infrared device.
-
IR Manual Delay: manually increases the infrared delay to keep pace with visible light. Adjust
the range to 0 ~ 15 frames.
•
Visible light
-
IP: the IP address of the visible light device.
-
Username/Password: user and password for visible camera are admin/ixts2020.
-
ONVIF Port: 17.06 compatible
-
CMOS RTSP: CMOS cameras can be used for CCTV purpose. Choose the right RTSP setting
on IP Camera & NVR.
•
Infrared image
-
Palette: there are 12 palettes to choose from.
-
Image Alg: there are two algorithms, PHE and LINEAR, the PHE algorithm is generally used
by default.
-
Gain: the gain value can be adjusted to achieve better display effect and meet observation
requirements.
-
DDE Level: the DDE level can be adjusted to increase the screen details.
-
LINEAR Temperature: suitable for LINEAR algorithm, not suitable for PHE algorithm.
As shown in the above image, 20 degrees corresponds to grayscale, and 40 degrees
corresponds to grayscale 255, which can be set by the user.