8
Interchange Brands, LLC
Pneumatic Roll Carton Closing Stapler
Model No. SRB-GR
Operating Instructions
Operating the Tool
1.
Disconnect the air supply
2.
Add a few drops of Interchange Tool Oil
or 3-in-1 oil into the air inlet .
3.
Install a quick connect fitting to the tool .
4.
Regulate the air pressure to obtain
85psi / 6kg/cm
2
at the tool .
5.
Insert staples into your tool following
the instructions for loading the tool .
6.
Reconnect the air hose to the tool .
7.
Grasp handle with one hand . Position
the tool on the box in line with the
desired staple location . There is a
small projection on either side of the
magazine seat as an aid in locating the
position of the staple . Press trigger and
move tool to next staple location with or
without releasing trigger .
8.
Strongest closure requires end staples
to be placed close to the end of the box .
Adjustments for depth of penetration
and tightness of clinch are easy and
can be found on page 7 .
Note: Check staple clinching by testing
the tool on samples of box board before
being used in a work environment .
WARNING:
To prevent accidental injuries: never place a hand or any other part of body in
staple clinching area or adjustment window . Never point tool toward anyone else . Never engage in
horseplay . Always handle the tool with care . Never pull trigger unless tool is in positioned over carton .
Protect your eyes and ears: wear safety glasses with side shields and wear hearing protection .
Employers and users are responsible for ensuring the user or anyone near the tool wear this safety
protection and follow these safety precautions .
NOTE:
Check and replace any damaged or worn components on the tool.
2
3
1
4
6
7
5
8
