6
Interchange Brands, LLC
Pneumatic Roll Carton Closing Stapler
Model No. SRB-GR
Loading the Tool
Check Staple Leg Length
1.
Disconnect the air supply
2.
Slightly squeeze cover back then pull to
open cover .
3.
Place roll staples in magazine . Feed front
end of roll staples into right coil guide, left
coil guide, and top guide . Push forward
until stopping in driver guide unit .
4.
Swing cover closed and slightly squeeze
cover to snap closed .
Check the position engagement .
1.
Disconnect the air supply
2.
Loosen set screw with 3mm hexagon wrench key .
3.
Turn adjusting rod 180° with a screw driver to the desired
adjustment .
a .
If you want to shoot long leg staples, position “L” on
adjusting rod up . Then loosen the round head screw with a
screw driver . Move the right coil guide in and move the left
coil guide out . Then tighten the round head screw .
b . If want to shoot short leg staples, position “S” on adjusting
rod up . Then loosen the round head screw with a screw
driver . Move the left coil guide in and move the right coil
guide in . Then tighten the round head screw .
Operating Instructions
1
2
3
4
3
a & b
2
