Interalia XMU+, Installation Handbook, Page: 56 / 63

50 Chapter 6
Setting line card operating mode
Š
LS/PR MP NC - Level Start/Pulse Return multiple play, CP relay normally
closed.
Š
LS/LR SP NO - Level Start/Level Return single play, CP relay normally open.
Š
LS/LR SP NC - Level Start/Level Return single play, CP relay normally
closed.
Š
PS/LR NO - Pulse Start/Level Return, CP relay normally open.
Š
PS/LR NC - Pulse Start/Level Return, CP relay normally closed.
Š
PS/PR NO - Pulse Start/Pulse Return, CP relay normally open.
Š
PS/PR NC - Pulse Start/Pulse Return, CP relay normally closed.
Š
CP - Continuous Play, no relay toggle.
Š
CP NO - Continuous Play, CP relay normally open. (Default for low
impedance line cards.)
Š
CP NC - Continuous Play, CP relay normally closed.
Š
SCP NO - Synchronized Continuous Play, CP relay normally open.
Š
SCP NC - Synchronized Continuous Play, CP relay normally closed.
Š
Off-line - Line will not operate.
9.
If required (for operating modes R , RN , RQ , RT , and RD ), press the Right
Arrow button until you reach the desired ring limit, and press Enter . The ring
limit is the number of cycles (rings) that the XMU+ will wait before answering
the line (default is 1).
10. Press Exit until the menu returns to the main display.
11. If operating mode R is selected, perform a line check.