5. Switching on
—
Scape X®
32 AIO
Technical specifications are subject
sx32aio-006
to change without notice.
Operating Manual
Version 1.7 – Status: 05/2020
Page 14 of 26
poc: SFi
5.
Switching on
Switch on your device at the main switch (see chapter
2.1 - Connections & controls - point 5).
Turn on the display first and then your PC (
point 1
).
Make sure that there are no objects on the display when the
device is switched on.
Do not touch the touch screen during device startup, otherwise
there will be errors in the touch and object detection.
The device will take about 1.5 hours to power up before it reaches its final operating temperature. During this time, the
touch sensor of the device constantly adapts to its environment. This has a direct effect on long-term object
recognition.
If your application requires the Scape X® and Capore® objects to
remain on the screen for a long time, do not use object detection
until the device has reached its operating temperature.
