1. General
—
Scape®
Lab
Technical specifications are subject
sla65-004
to change without notice.
Operating Manual
Version 1.6 – Status: 11/2019
Page 6 of 20
poc: SFi
1.2.
Scope of delivery
The following accessories are included with your
Scape® Lab
:
·
Multi socket adapter with Schuko plug for mains power
·
Network cable for connection to LAN network
·
Wireless keyboard with trackpad
·
Screen cleaning kit
·
Remote control
·
Operating manual (possibly by email)
1.3.
Cleaning instructions
The touch sensor of the
Scape® Lab
does not usually need to be serviced. Nevertheless, it is recommended to clean the
glass surface of the screen regularly.
·
Disconnect the device from the mains before cleaning.
·
Typically, a solution of isopropyl alcohol and water (50:50 blend ratio) or the included screen cleaning kit are best for
cleaning the touch sensor.
·
Apply the solution to a soft, lint-free cloth. Avoid using rough cloths.
·
Use the cloth to clean the glass surface. Apply the liquid only to the cloth and never directly to the device. This will
prevent liquid from entering the inside of the device or causing marks on the frame.
1.4.
Transportation instructions
The safest way to transport your device is in a
Scape® Lab
flight case (sold separately).
·
The device is very heavy. Make sure that at least two people lift and carry the device.
·
Do not transport the device upside-down
·
Apply the brakes on the castors of the frame during transportation.
·
Secure the device or flightcase against slipping and tipping.
