PublIc Address MIxIng AMPlIfIer
8
PM-236/248/260
6. RM-05A COnnECtIOn tERMInAl
It is a terminal to use by connecting our rM-05A. Pin arrangement of the terminal is as follows.
7. EXtERnAl ChIME (EXt ChIME) SWItCh tERMInAl
It is a terminal to connect the switch when operating the 4-note scale chime of this device on the outside.
When the contact closure comes in external chime switch terminal, 4-note scale chime operates.
8. EXtERnAl MUtE SWItCh tERMInAl
It is a terminal to connect the switch when operating the degree that the sound of InPuT 1 – 6, cHIMe, exT
In are decreasing in this device. When the contact closure comes in external MuTe switch terminal, the
sound of InPuT 1~6, cHIMe, sIren, exT In decreases as much as the volume controlled with the Tel In
priority control volume and priority control volume (PrIOrITY MuTe).
9. PRIORIty SElECt SWItCh
This is a switch that adjusts the volume of InPuT 3~6, exT In sound when a signal is input to the InPuT 1 or
InPuT 2.
ex) When press the switch of InPuT 2 and signal is input to InPuT 2, sound of InPuT 3~6, exT In is
reduced.
10. SPEAKER OUtPUt tERMInAl
It is a terminal to use when connecting the speaker. When connecting the speaker, use not to be in overload
state.
※
You can control sP1 - 5 terminal with the speaker selection switch on the front side.
※
be careful not to use 4Ω terminal and sP1 - 5 terminal (high-impedance speaker terminal) simultaneously.
When connecting the speaker, connect the speaker to use to the speaker terminal on the rear panel in
accordance with the following connection after removing the power cord from the outlet.
Pin 1: remote amplifier input signal hot (+)
Pin 9: remote control ground
Pin 2: remote amplifier input signal cold (-)
Pin 10: dc +24V
Pin 3: signal ground
Pin 11: remote chime
Pin 4: remote control 1 (sP1)
Pin 12: nc
Pin 5: remote control 2 (sP2)
Pin 13: nc
Pin 6: remote control 3 (sP3)
Pin 14: nc
Pin 7: remote control 4 (sP4)
Pin 15: nc
Pin 8: remote control 5 (sP5)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
