PUBLIC ADDRESS AMPLIFIER
7
PCT-610/620
14. MIC TONE CONTROL OF CH1 ~ CH6
Controls High (8kHz), MID (1kHz), or LOW (250Hz) tones.
First, press ‘ENTER’ button to enter into EQ Mode, then select the tone of the channel you want, adjust the MIC
Tone Control Volume and press ‘ENTER’ to save and exit the EQ Mode. Please refer to the ‘CHANNEL EQ
SETUP’ section (page 14).
15. EQ MODE AND SETUP BUTTON
This button is used for entering the EQ Mode and setting the setup in the setup mode.
Please refer to the ‘CHANNEL EQ SETUP’ section (page 14) and ‘SETUP Mode’ section (page 15) for details.
16. MIC CHANNEL TONE CONTROL VOLUME
Adjust the level of the 3-Band MIC Tone.
To adjust the level of a tone, press ‘ENTER’ button to enter into the EQ Mode.
Press the tone button (H, M, or L) of the channel you want and adjust the tone control volume and then press
the ‘ENTER’ button to save and exit the EQ Mode.
Please refer to the ‘CHANNEL EQ SETUP’ section (page 14) for details.
17. DISPLAY
VFD (Vacuum Fluorescent Display) displays the state of the operation of the unit.
18. MASTER VOLUME
Adjust the signal level of the post output and the speaker outputs.
