Inter-m PCT-610 Operation Manual Download Page 8

PUBLIC ADDRESS AMPLIFIER  

6

PCT-610/620

5) RANDOM Button

Press this button to do random play in CD function.

5. REMOCON WINDOW

This is the receiving window of the IR (Infra Red) signal from the remote controller. The remote controller can

be used in about 7m distance within an angle of 30°(left/right). 

Remote controller is a option.

6. DISC INSERT SLOT

This is the insert slot of a CD Disc.

If you put a CD Disc in the slot, then the disk is automatically entered into the slot.

7. NUMERICAL BUTTONS

Press the track number buttons you want when you play a track in the CD function.
Press the preset number button you want when you search the preset station in the FM function.

8. CD / FM RELATED BUTTONS

1) 

(Play/Pause) / PRESET SCAN Button

In CD function - Play or Pause Button. 
In FM function - Preset Scan Button.

2) 

/  PRESET  , PRESET 

Button

In CD function - Backward Skip and Forward Skip Button. 
In FM function - Preset Down and Preset Up Button

3) 

(Stop) / MEMO Button

In CD function - Stop Button. 
In FM function - Memory Button

4) 

/ TUNING  , TUNING 

Button

In CD function - Backward Search and Forward Search Button. 
In FM function - Tuning Down and Tuning UP Button

9. EJECT BUTTON

Pressing this button will eject the CD disc from the unit.

10. CHIME BUTTON

CHIME 1 Button : Press this button to activate the 2 tone chime.
CHIME 2 Button : Press this button to activate the 4 tone chime.

11. CHANNEL VOLUME

Controls the individual volume level of Mic Channels.

12. SOURCE VOLUME

Controls the volume level of FM tuner or CD player.

13. TONE CONTROL 

Adjust Bass or Treble to cut(decrease) or boost(increase) the frequency of 100Hz or10kHz.  

Summary of Contents for PCT-610

























Reviews: