PUBLIC ADDRESS AMPLIFIER
17
PCT-610/620
8. EM TYPE (DEFAULT : VOICE, DRP : OPTION)
You can select one of the EM broadcasting. After choosing VOICE or DRP, Press ENTER, .
- VOICE: Select the basic EM source.(Default)
- DRP: Select the recorded EM source by the user.
Basically the unit is set to the default EM type, VOICE. If you want to record your own EM broadcasting,
first you have to add the DRP option. DRP option costs you extra charge.
9. DRP (DIGITAL RECORD PLAYBACK) FUNCTION (OPTION)
You can record the emergency broadcasting message of 60 seconds by DRP function.
You can record through CH1 or AUX IN.
- Play DRP
1) Choose ‘1.PLAY’ in DRP setup
2) If you press the ‘ENTER’, , It repeats the recorded EM broadcasting message, when the EM type is set to
‘2.DRP’.
3) Press again the ‘ENTER’,
or CH6 H, . Stop playing.
- Record DRP
1) Choose ‘2.REC’ in DRP setup. Press ‘ENTER’, .
2) Select the source of record (CH1 or AUX IN). Press ‘ENTER’, .
3) Press ‘ENTER’,
to start recording, when ‘DRP REC READY’ is displayed on the VFD.
4) Count down 60 seconds for recording. You can record a message of 60 seconds.
5) If you want to stop recording, Press the ‘ENTER’,
or ‘H of CH6’, .
When countdown becomes ‘0’, it is automatically stopped.
6) You can check the recorded message if you choose ‘1. PLAY’ in DRP Setup.
NOTE
: When you record a emergency message, adjust the recording level to be between 4~6 column in
the level meter on the VFD.
For CH1 input, adjust the level with the trim volume on the rear panel.
For AUX IN, adjust the level on the external source.
After recording a emergency message, you have to check the emergency broadcasting
message with the EM terminal on the rear panel.
10. SYSTEM INFORMATION
Choose SYSTEM INFO and press ‘ENTER’, . You can check the current firmware version.
If you do not press any key for 10sec, then exit the setup mode.
