Inter-m DSA-2000Q, Operation Manual

Page: 7 / 36

ProfessIonAl PoWer AMPlIfIer
5
DsA-500Q/2000Q
with the speaker lines and/or connected cables. As such, check the status of Xlr cables, etc.
connected to the device, and reconnect if necessary. If the PrT/MUTe indicator remains when power
is re-connected and the oleD panel at the front or the window program indicates PrT, it may mean
the device is broken. In such case, inspect your device at the Inter-M branch you purchased your
device or visit our customer service center.
● If the MUTe indicator is on:
output has been turned off via the DsP of the device/ If you want to resume output, please release
the MUTe function.
2) Indicator that shows the output level of this device.
-30: Green, -10: Green, PrT: red
6. CH SELECT/MUTE BUTTON (CH1, CH2, CH3, CH4)
Button that enables you to select the corresponding channel. The device will select the corresponding channel
if you press a button. The channel will be MUTeD if you press the same button again.
7. BRG LED
leD that indicates the BrIDGeD mode. If you set the device to the BrIDGeD MoDe, the BrG leD (orange)
will come on.
Please refer to the instructions on page 13 of this manual for details on how to set up the BrIDGeD MoDe.
In BrIDGeD MoDe, you can control the level for CH1-2 with the volume for CH1, and control the level for
CH3-4 with the volume for CH3.
※
Caution: output levels rise in BrIDGeD MoDe, so please make sure to check the output levels.