Inter-fab X-stream, Assembly And Instruction Manual

Page: 2 / 14

- 2 - 2
Assembly/Installation Instructions for
X-stream Slide
The following Assembly and Installation instructions are listed in the correct
sequence for a straightforward assembly of the X-stream Slide. Please read
and understand all instructions before beginning installation. A two-person
crew is recommended for best results, as the assembled slide is very long, and
unwieldy for one person to handle. The Footprint Templates (A-2, A-3) are
for reference only, and it is strongly recommended that the slide not be
permane ntly anchored to deck until the proper time in the assembly order.
Choose the Water Stub-up Location and Footprint Template for the
the applicable X-stream slide from the following figures.
Fig. A-1: Water Stub-up Location, Left Hand Slide
Fig. A-2: X-stream Footprint, Left Hand Slide
Fig. A-3 Water Stub-up Location, Right Hand Slide,
and X-stream Footprint, Right Hand Slide
For List of Parts, and Required Tools, See Fig. B, and Schedule One
Important Note: Following Step Seven in the Installation Instructions are
two pages, one indicating an exploded view of the entire slide, followed by
a complete description of all the hardware used to assemble the slide.