Inter-fab X-stream, Assembly And Instruction Manual

Page: 13 / 14

- 13 - 13
Step Six: Connect Water Supply System
Connect bottom hose to water system as re quired, using proper
connectors (by others) and in-line valve (furnished) as required. (Fig. 11)
Fig. 11
•
Install top hose section, cutting piping to fit as required, and connecting to
male adapter which attaches to Top Section. Use PVC primer and glue
(not included) as required. (Fig. 12) Use Hardware Set #6.
Fig. 12
Step Seven: Finish
•
Install all protective caps at exposed bolts.
•
Turn water supply on and check water flow.
•
Clean Slide and dispose of all debris caused by the installation.
Note: It is recommended that after several days’ use, all visible bolted
connections be re -tightened as needed.
Owner or Installer to
provide Stub-Up or
water supply as req’d.
Connect hose to
male adapter
Note: In-line valve
provided by Mfr. may
also be installed in this
location.