I N T E N S E C Y C L E S . c o m
// 1 3
25
24
27
23
26
22
i n s T A L L i n G D e r A i L L e U r H A n G e r / /
A
Apply a thin layer of grease to
the derailleur hanger (#130826)
shank and install into the keyed
insert on the drive side of the rear
triangle (Image #25).
B
Install derailleur hanger nut
(#130827) using a 19 mm socket,
torque to 11 Nm / 100 in-lbs
(Image #26 and #27).
i n s T A L L i n G C r O s s B r A C e T 2 5 T O r X H A r D W A r e //
A
Holding the low profile screw
with T25 Torx (#130875) at the
clevis bolt (#130877/130834)
push the T25 Torx into the clevis
bolt and begin threading it into
the threaded cross brace (Image
#22 and #23). Repeat for both
right and left sides. Tighten until
snug. We will return with a T25
Torx key and torque wrench
after completed frame assembly
(Image #24).
Summary of Contents for Sniper T
Page 1: ...user manual s n i p e r T...
