i N T e N s e
// 2 5
23
25
22
24
C
With the rear wheel and axle
installed, insert a 5 mm HEX/Allen
key through derailleur cap on the
drive-side to reach the 5 mm HEX/
Allen interface on the inside of the
axle. Turn wrench counter clock
wise to tighten the axle. Torque to
11 Nm or 100 in/lbs (Image #22).
D
On the non drive-side, use a 5
mm HEX/Allen wrench and torque
the cone adjuster to 14Nm or 125
in/lbs (Image #23).
S E A T C L A M P //
A
Install seat clamp on frame,
note that the serial number is
on this area of the front triangle
(Image #24).
B
Grease and install M6 x 18
mm bolt through the drive-side
of seat clamp (Image #25), when
seatpost is installed torque the
seat clamp to 5 Nm or 45 in/lbs.
