Intense Cycles TAZER, User Manual, Page: 9 / 17

about the battery //
1 6 // t a z e r u s e r m a n u a l I N T E N S E C Y C L E S // 1 7
D A N G E R
Use the Shimano specified charger and observe the specified charging
conditions when charging the specified battery. Not doing so may cause
overheating, bursting, or ignition of the battery.
C A U T I O N
• When removing the battery charger power plug from the outlet or the
charging plug from the battery, do not pull it out by the cord.
• When charging the battery while it is mounted on the bicycle, be careful
not to trip over the charger cord or get anything caught on it. This may
lead to injury or cause the bicycle to fall over, damaging the components.
R I D I N G T H E B I C Y C L E
1. Turn on the power.
a. You cannot use the battery immediately after shipment.
Refer to ”CHARGING THE BATTERY”
b. Do not place your feet on the pedals when turning
the power on. A system error may result.
c. Power cannot be turned on while charging.
2. Select your preferred assist mode.
3. Assistance will start when the pedals start turning.
4. Change the assist mode in accordance with the riding conditions.
5. Turn the power off when parking the bicycle.
a. Do not place your feet on the pedals when turning
the power off. A system error may result.
Intense bicycle identification //
It’s important to keep track of your Tazer’s serial number as well as the
serial numbers of its important components for warranty and replacement
purposes. Included in your ACCESSORY KIT is a serial number sheet so
this information can easily be tracked and stored in a safe place.
R E g i s t e r i n g / r e p l a c i n g
y o u r a b u s b a t t e r y k e y
Worried about losing your key or need to order a spare? No worries.
However, to successfully order a replacement, you’re going to need a few
bits of information so, before its too late, do yourself a favor and document
and register the unique identifiers of your key.
key type: wafer
key code:
key profile:
To order your new key, head over
to https://mobilesecurity.abus.com
and click "Order Key" or visit your
local ABUS dealer for help.
key code
key
profile
H a n d l i n g a n d c h a r g i n g t h e b a t t e r y
• Charging can be carried out at any time regardless of the amount of
charge remaining, but you should charge the battery until it is fully charged
• Be sure to use the dedicated charger when recharging the battery.
• The battery is not fully charged at the time of purchase. Before
riding, be sure to charge the battery until it is fully charged.
• If the battery has become fully spent, charge it as soon as possible. If you
leave the battery without charging, it will cause the battery to deteriorate.
• If the bicycle will not be ridden over an extended period of time,
store it away with approximately 70% battery capacity remaining. In
addition, take care not to let the battery become completely empty
by charging it every 6 months.
• The use of a genuine Shimano battery is recommended. Connect
to E-TUBE PROJECT and click [Connection check] to confirm
whether the battery in use is a genuine Shimano battery. If using a
battery from another manufacturer, make sure to carefully read the
instruction manual for the battery before use.