Intense Cycles TAZER, User Manual, Page: 11 / 17

2 0 // t a z e r u s e r m a n u a l I N T E N S E C Y C L E S // 2 1
r e m o v i n g t h e b a t t e r y //
A Remove battery door by using
two fingers to compress or pull
the snap lock tab back toward
the door. This will allow the door
to pivot open so it is now angled
off the downtube (Images #1, #2).
B Lift the door up at the angle it’s
at, freeing the lower locating tab
from the frame (Image #3).
C With your right hand, insert
battery key into lock.
D With your left hand, unfold and
hold battery pull strap.
E Turn battery key a quarter turn
with right hand (Image #4).
F Pull battery strap with left hand
until the battery has moved past
the front lock (Image #5).
G Release the key. The key can
now be removed and placed in a
safe, easy to access location.
H Continue pulling battery pull
strap with left hand while holding
onto the top of battery with right
hand. The battery will continue to
pivot off the lower mount and out
of the downtube (Image # 6).
I Lift the battery out and away from
the downtube (Image #7).
i n s t a l l i n g t h e b a t t e r y //
A Place pull strap on battery as
shown, then lift battery up with
two hands, left hand on the pull
strap and right hand at top of
battery (Image #1).
B Angle the bottom of battery into the
lower mount of the downtube and
push it into the lower mount. The
bottom of the battery should now be
hooked into the lower battery mount.
With it hooked it should now pivot
into the lower battery mount as the
top of the battery is pushed toward
the upper battery mount (Image #2).
C Continue pushing the top of the
battery so that it slides into the
upper mount then clicks and locks
into place.
D Confirm the battery has clicked
and is fully seated in the top
battery mount by tugging on the
battery pull strap. If battery moves
away from the mount then push it
back against mount until battery
is fully seated (Image #3). The
battery pull strap can now be
folded onto itself so it doesn’t
obstruct the battery door.
E Re-install the battery door
with the lower tab fitting into the
downtube opening first (Image #4).
F Once the battery door fully slides
down into the door opening, pivot
the door in a closing motion
(Image #5) .
G As the door is nearing the closed
position at the top of the door give
the door a good push to allow the
door’s snap lock feature to engage
into the downtube (Image #6).
6
2
2
5
7
1
3 4
4
5 3
1
6