Step 3:- Setup the IT-123 VIP Numbers.
This defines ALL the telephone numbers that are able to query the location of the IT123. Up to 5
numbers may be defined
SMS the following command to the phone number in the IT-123.
$WP+SETVIP=PIN,SMS1,SMS2,SMS3,SMS4,SMS5
Where:-
PIN is the allocated pin of the device as defined on the front page of this manual.
SMS1 to SMS5 define the 5 telephone numbers that the device will accept incoming calls from to
return an SMS defining location.
Example:-
$WP+SETVIP=0000,0412345678,0400123456,04011253456,,
Or
$WP+SETVIP=0000,0412345678,0400123456,,, (if only 2 numbers)
Or
$WP+SETVIP=0000,0412345678,,,, (if only 1 number)
The IT-123 will send a return confirmation SMS to your master phone number as
follows:-
$OK:SETVIP=0412345678,0400123456,04011253456,,
Step 4:- Setup the IT-123 VIP Number Selection.
This defines the telephone numbers that you can easily select or change from those defined in step 3.
SMS the following command to the phone number in the IT-123.
$WP+VPOS=PIN,2,Selection
Where:-
PIN is the allocated pin of the device as defined on the front page of this manual.
Example:-
$WP+VPOS=0000,2,1
Selects only 1
st
number defined above 0412345678
$WP+VPOS=0000,2,2
Selects only 2
nd
number defined above 0400123456
$WP+VPOS=0000,2,5
Selects 3
rd
and 1st number defined above 0412345678, 04011253456
The IT-123 will send a return confirmation SMS to your master phone number as
follows:-
$OK:VPOS=2,1
Selection Mask Value
1
Selects SMS1
2
Selects SMS2
4
Selects SMS3
8
Selects SMS4
16
Selects SMS5
Example:-
To select SMS1 = 1
To select SMS1,SMS2 =1+2=3
To select SMS1, SMS2, SMS3 = 1+2+4 = 7
To select SMS1,SMS2,SMS3,SMS4 = 1+2+4+8=15
To select SMS1,SMS2,SMS3,SMS4,SMS5=1+2+4+8+16=31
