Web Managed GbE Switch
36
Aggregated
This field displays the ports that are aggregated in a trunk group.
A static trunk would be aggregated immediately; an LACP trunk exchanges
LACP PDU to link partner to aggregate.
Delete
Click this button to delete the trunk.
3.3.3.2 LACP
Click
Switching
>
Trunk
>
LACP
to display the screen shown below.
LACP: Link Aggregation Control Protocol.
Note: Do not configure this screen unless you want to enable dynamic link aggregation.
The following table describes the labels on this screen.
LABEL
DESCRIPTION
LACP Enable
Select
Enable
from the drop-down box to enable Link Aggregation
Control Protocol (LACP). Select
Disable
to not use LACP.
System Priority
LACP system priority is a number between 0 and 65,535. The switch with
the lowest system priority (and lowest port number if system priority is the
same) becomes the LACP “server.” The LACP “server” controls the
operation of LACP setup. Enter a number to set the priority of an active
port using Link Aggregation Control Protocol (LACP). The smaller the
number, the higher the priority level.
Apply
Click
Apply
to save your changes to the Switch.
Summary of Contents for 560801
Page 17: ...Web Managed GbE Switch 17...
Page 23: ...Web Managed GbE Switch 23...
