Web Managed GbE Switch
32
Time Zone
Select system time zone by hours and minutes. “+” means after-UTC and
“-” means before-UTC.
Apply
Click
Apply
to save your changes to the switch.
3.3 Switching
Use the Switching pages to configure settings for the switch ports, trunk and other switch features.
3.3.1 Port Setting
This page allow the user to configure switch port settings and show port current status.
Click
Switching
>
Port Setting
in the navigation panel to display the screen shown below.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Port Select
Select the port(s) from the list box that you will change the port settings
for.
Name
It allows you to give a description of the port.
Enabled
Select
Enable
from the drop-down box to enable a port. The factory
default for all ports is enabled. A port must be enabled for data
transmission to occur. Select
Disable
to not use a port.
Speed
Port speed capabilities:
Auto:
Auto
speed with all capabilities.
Auto-10M:
Auto speed with 10M ability only.
Auto-100M:
Auto speed with 100M ability only.
Auto-1000M:
Auto speed with 1000M ability only.
Auto-10/100M:
Auto speed with 10/100M ability.
Summary of Contents for 560801
Page 17: ...Web Managed GbE Switch 17...
Page 23: ...Web Managed GbE Switch 23...
