Intellinet 560801, User Manual

Page: 26 / 96

Web Managed GbE Switch
26
LABEL DESCRIPTION
Trunk
This field displays the trunk to identify a trunk group; that is, one logical link
containing multiple ports.
Type This field displays the type of the trunk group: a static trunk or an LACP trunk.
Master port
This field displays which ports are master ports of the trunk. The port with
lowest port ID is designated to be master port of the trunk. To synchronize the
settings of trunk member ports, the configuration of the trunk master port
would be applied to all trunk member ports. Other member ports are slave
ports that cannot be configured individually in most settings (such as VLAN,
port ability and so on.) but follow the configuration of the master port.
Member This field shows the member ports of the trunk.
Active/
Passive If the trunk is an LACP trunk, this field shows the LACP active and passive
ports. The LACP active port would send LACP PDU periodically.
Aggregated
This field displays the ports that aggregated in a trunk group. A static trunk
would be aggregated immediately; an LACP trunk exchanges LACP PDU to
link partner to aggregate.
Delete Click this button to delete the trunk.
3.1.5 MAC Address Table
Use the MAC Address Table pages to show dynamic MAC table and configure settings for static
MAC entries.
3.1.5.1 Dynamic Learned
Click
Status > MAC Address Table > Dynamic Learned in the navigation panel to bring up the
screen shown below.