Intellinet 522328, User Manual

Page: 9 / 12

5. The media can be forced to one of the five modes (see below).
Cmd: “insmod r8169 media = SET_MEDIA”
Example: “insmod rtl8169 media=0x04” will force PHY to operate in
100 Mpbs half duplex.
SET_MEDIA can be:
_10_Half = 0x01
_10_Full = 0x02
_100_Half = 0x04
_100_Full = 0x08
_1000_Full = 0x10
noVEll nETWaRE SySTEM (4.X)
1. Update Netware Server to 4.2. NOTE: If you don’t update to 4.2, use
the update file “MSM.NLM, ETHERTSM.NLM” on the CD.
2. Run NetWare Server System.
3. When the server prompt appears, load the NetWare Server Installation
Utility (“LOAD INSTALL”).
4. In the Installation Options menu, select “Driver options.”
5. In the Driver Options menu, select “Configure network drivers.”
6. In the Additional Driver Actions menu, select “Select a driver.”
7. Press <Ins> to install an unlisted driver, then press <F3> to specify a
different path.
8. Insert the driver CD and specify the path “E:\NWServer\” (E representing
your CD-ROM drive).
9. In the Select a driver to install: menu, select “Gigabit Ethernet Network
Adapter” (Gigabit PCI Network Card).
10. If necessary, select the Select/Modify driver parameters and protocols”
menu.
11. Follow any remaining instructions to complete the driver installation.
noVEll nETWaRE SySTEM (5.X/6.X)
1. Run NetWare Server System.
2. When the server prompt appears, load the NetWare Server Installation
Utility (“LOAD NWCONFIG”).