Intellinet 522328, User Manual

Page: 10 / 12

3. In the Installation Options menu, select “Driver options.”
4. In the Driver Options menu, select “Configure network drivers.”
5. In the Additional Driver Actions menu, select “Select a driver.”
6. Press <Ins> to install an unlisted driver, then press <F3> to specify a
different path.
7. Insert the driver CD and specify the path “E:\NWServer\” (E representing
your CD-ROM drive).
8. In the Select a driver to install: menu, select “Gigabit Ethernet Network
Adapter” (Gigabit PCI Network Card).
9. If necessary, select the Select/Modify driver parameters and protocols”
menu.
10. Follow any remaining instructions to complete the driver installation.
sPeCifiCatioNs
10
nETWoRk
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast
Ethernet)
• IEEE 802.3ab (1000Base-T Gigabit
Ethernet)
• RJ-45 connector
• MDI/MDI-X
• Ethernet 10 Mbps (half duplex)
• Ethernet 20 Mbps (full duplex)
• Fast Ethernet 100 Mbps (half duplex)
• Fast Ethernet 200 Mbps (full duplex)
• Gigabit 1000 Mbps (half duplex)
• Gigabit 2000 Mbps (full duplex)
HaRDWaRE
• FCC Compliance, CE Mark
• Compliant with 32-bit PCI V2.2
• Bus speed: 66 or 33 MHz
• 10 Mbps Link/Act LED: green/blinking
green
• 100 Mbps Link/Act LED: green/
blinking green
• 1000 Mbps Link/Act LED: green/
blinking green
EnViRonMEnTal
• Dimensions: 13 x 15.7 x 1.5 WxDxH) cm
(5.1 x 6.2 x 0.6 in.)
• Weight: 56.7 g (2 oz.)
• Operating temperature: 0 – 50°C
(32 – 122°F)
• Storage temperature: 20 – 70°C
(4 – 158°F)
• Operating humidity: 10 – 90%,
non-condensing
• Storage humidity: 5 – 95%,
non-condensing
SuPPoRTED oS
• Windows 2000, XP, Vista
• Mac
• Linux