Intellinet 522328, User Manual, Page: 4 / 12

NOTE: 1000Base-T signaling requires four twisted pairs of Category 5/6
balanced cabling, as specified in ISO/IEC 11801:1995 and ANSI/EIA/
TIA-568-A (1995) and tested for additional performance using testing
procedures defined in TIA/EIA TSB95.
FCC Statement
This device compiles with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including interference
that may cause undesired operation
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at his own expense.
CE Mark Warning
In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.