4
Description of LEDs
NAS Quick Start Installation
In order to facilitate the use of the NAS, the product comes with default settings that most
users can install without any modification. If the network manager needs to modify any of
the settings, the NAS provides an intuitive Web-based user interface.
NOTE:
Make sure that the TCP/IP protocol is installed on the networked computers that
wish to access the NAS.
Hardware Installation
Connect the included Ethernet cable and power
adapter to the back of the NAS.
Connect the other end of the Ethernet cable to an available
port on a network switch, router or computer’s LAN port.
LED
Status
Meaning
On Power
On
Power
Off Power
Off
Solid/Off
System is not ready
Heart-Beat
Flashing
System is ready
On
Link is up
Off Link
down
Link/Activity
Flashing Transmitting/receiving
packets
On
The network link is 100 Mbps
Ethernet port
10/100 Mbps Off
The network link is 10 Mbps
