21
USB HD Information
Each of formatted partitions (FAT32, EXT2 and EXT3) on the attached USB storage drive
will be shown in the USB HD information page. The naming rule for “Mounting path” is
based on the connecting port. For example, if the USB hard drive was attached on port A
and here are three formatted primary partitions on the disk, the SA will create "USBHDA1"
and "USBHDA2" mounting path to represent each partition space.
Advanced Settings
All the file protocols settings are located here. Disable any protocols not in use by the
computers on the network to increase performance. Most users will not need to change
any of the settings. Make sure to click on
Apply
after making any changes.
Change the workgroup or
NAS description. Workgroup
name should be the same for
all computers sharing files.
Enable Apple file sharing for
compatibility with older Macs
prior to OS X.
Enable the FTP server to
allow remote and local FTP
file access. Change the
default FTP port 21 for added
security or compatibility.
Note:
If you change the default port, users must manually enter
