3.3
Connecting the Power Adapter
This printer requires an external power supply. An approved Class 2 power supply is required for the operation of this product.
1.
Make sure the power switch is turned off.
2.
Insert the output plug of the power adapter into the printer DC jack.
3.
Plug in the adapter or the power supply’s cord to an outlet.
4.
Only use one of the following OMNIPrint adapters:
OMPS7205-915-NA
(120 VAC input)
OMPS7205-915-EU
(220-240VAC input)
OMPS7205-1220-SMPS
(90-240VAC input)
Output: 12VDC 2.0A , 2.1mm x 5.5mm female plug , Center positive.
3.4
Battery
3.4.1
Operation Without a Battery Pack
If your printer has dip switches then the sliding switch in the dip switch well must be set so the actuator is adjacent to the dip
switches. If your printer does not have dip switches, and has been specified to operate without a battery, then no configuration is
necessary. The printer power must be off before actuating any of the switches in the dip switch well. If your printer does not
have dip switches, and has not been specified to operate without a battery, then it must be operated with a battery pack.
Actuator adjacent to dip switches
3.4.2
Operation With a Battery
Pack
If your printer has dip switches then the sliding switch in the dip switch well must be positioned away from the dip switches. The
printer power must be off before actuating any of the switches in the dip switch well. If your printer does not have dip switches
then no configuration is necessary to operate with a battery.
Actuator away from dip switches
3.4.3
Charging procedure
Summary of Contents for Intell-Print OM7212
Page 2: ......
Page 15: ...4 External Appearance...
Page 22: ......
