Intelligent Home IH-692 Slave, User Manual

Page: 11 / 20

will display the view from the doorbell (Outdoor Station). During monitoring
state, press TALK/MON button (or touch
‘

’
icon) to talk to someone
outside. Press again to exit. The monitoring state is limited to 30 seconds
and will shut off automatically.
When you wish to open the door lock, press UNLOCK button (or touch
‘

unlock’
icon) to release the Electric Lock.
To get the system to record pictures automatically from the doorbell
when people come to the door, press MENU, press SETUP and press
AUTO-RECORD on. It will record up to 120 pictures of people at the
door even if you are not there to answer.
Press the RECORD Button (or touch
‘

’
icon) to manually record the
current picture.
Touch the
‘

’
icon to hide the icons; to re-show the icons, touch
anywhere on the screen again.
6.2 Operation for Multiple Doorbell Cameras (if required)
- If two doorbell cameras are required, the One/Two Camera option
should be enabled. To do this, touch
‘

’
icon to enter SETUP. Now
press ADVANCED SET (tings) submenu. Enter the password (2008),
and change the mode to 1/2 CAMERA.
- Two doorbell cameras can be connected to the monitor directly. The
second outdoor station can be a doorbell or a CCTV camera. For the
system to function correctly, you must have at least one doorbell. If
there is only one Outdoor station to be installed, the Outdoor station
must be connected to the CAM1 Port. The second must be connected
to the CAM2 Port.
- When monitoring multiple doorbells/CCTV cameras (outdoor stations),
switch between them by pressing TALK/MON. Each time you press
TALK/MON it will take you to the next outdoor station.
Please Note: If two doorbells connected, and each doorbell is connected to an
electric lock, when you operate EITHER of the UNLOCK buttons on EITHER
monitor, it will unlock BOTH locks. If you don’t wish for this to happen, you can
purchase and install an RLC controller and operate them separately.
-6-