5
III. PPK-3A Troubleshooting
A.
Low Batteries
1.
System Reset: When the batteries get critically low, the system
may reset and lose the previously stored Sensor ID Number.
B.
Limited RF Signal Reception
1.
SMA Antenna, or other antennas, may not be securely attached to
SMA connector.
2.
Interference from surroundings such as bushes, trees or walls may
be blocking RF signal to the PPK-3A Receiver. Optional antennas
may increase reception.
C.
No Audible Beep
1.
The problem may be the Headphone Jack. First check both the
Beeper Module and the Earbud Headphones to ensure that these
devices are working properly. It is not recommended to use any
other Headphones or 3.5 mm accessories with the PPK-3A.
