User Manual - HydroBot Robotic Floor Scrubber
© 2012 Intellibot Robotics, LLC All Rights Reserved v2.5
Page 3
Login Screen
At the login screen, enter an assigned passcode using the keypad. Press
to
complete log in.
Note: If the passcode is unknown, contact your robot administrator.
Operation
This section provides basic information on the HydroBot Robotic Floor Scrubber.
Caution
To prevent condensation of critical components, before operating, allow the robot to sit (1) hour for every
7.2°F
(4°C) difference between storage temperature and 70°F (21°C).
Operator Pager
The operator will be paged when the robot finishes a cleaning routine, runs low
on battery charge, or encounters an obstacle that it is unable to navigate around.
Parking Brake
The HydroBot Robotic Floor Scrubber has a parking brake that can be engaged
from the rear of the robot (see red handle). Pivoting the red handle to the left
locks the parking brake, moving it to the right releases the parking brake.
Note: The robot will not move when the parking brake is engaged.
Tank
The HydroBot Robotic Floor Scrubber has a 3-stage filtering system, providing
filtering to 10, 5, or 1 micron(s), utilizing a 25-gallon, high-density, roto-molded,
seamless, linear, polyethylene tank. The robot can run for 8 consecutive hours
without changing solution. The tank should be drained, rinsed and cleaned at the
end of every work shift. This will ensure the robot remains clean and free of
bacteria.
Summary of Contents for HydroBot Series
Page 6: ......
