User Manual - HydroBot Robotic Floor Scrubber
© 2012 Intellibot Robotics, LLC All Rights Reserved v2.5
Page 14
18.
Maneuver the robot to the starting location of the next area, staying
within the boundary of any previous area. Note: It is important to stay
within the boundary of any previous area so that proper intersections
(junctures) are created. To perform a 90-degree right turn, press
,
a 90-degree left turn, press
, or a 180-degree turn, press
.
Note: To perform a turn other than 90 or 180 degrees, begin by
holding the handlebar and pressing either left or right turn icon. The
robot will rotate slowly; release the handlebar once the robot is
aligned.
19.
Press
and engage the handlebar to move the robot into position.
Note: Stay in the boundary of the previous area when positioning the
robot at the starting point of the next area. Press
once the robot is
positioned at starting point of the next area. Repeat steps 5 thru 18
for the next area.
20.
The final screen displays the Learned Zone Name, number for areas
created for the zone and the route created. To continue, press the
green check mark.
Creating a Route
A Route is a collection of one or more Areas in the order that they are to be cleaned. Once areas of a zone have been
acquired (learned), it is possible to create a route.
1.
To create a route, begin by pressing the icon (shown by the red arrow).
2.
To create the new route, press
.
Summary of Contents for HydroBot Series
Page 6: ......
