B-10
Appendix B. Assembling Air-Conditioner (Optional)
6. Spread Silicon on the boundary of the duct plate assembly to protect the surface. Assemble the duct
hatch to the radome bottom.
7. Assembling Air-con Controller
Assemble the air-con controller between the air-con controller brackets using the M4x12L (6EA) hex head
wrench bolt, then install it inside of the radome.
Air-con
Controller
Bracket
Air-con
Controller
Air-con Controller
Position
Inside Radome
Description
Q’ty
Size
Remarks
Hex Head Wrench Bolt
6
M4x12L
Bolt Kit for A/C Controller Radome Bracket
Spring Washer
6
M4
Flat Washer
6
M4
8. Connecting System Cables
8.1 Connecting Cables inside Radome
Connect the "Air-con Controller Cable" to the cable connector on the Air-con Controller inside the radome.
Connect the "Air-Con. Power Cable" to the cable junction of the Circuit Brake Box inside the radome. Ensure
the cable is firmly fastened to the connector. After connecting the cables, adjust the cable length then fix the
cables on the cable holders by using cable ties. When all cables have been installed turn on the power switch.
WARNING
WARNING
Ensure that the power switch is off during installation. When all cables have been installed turn on the
power switch.
