Intellian t80W, Installation And Operation User Manual

Page: 66 / 143

t80W/t80Q – Marine Satellite TV Antenna System
66
9. Set the VOLT THRES.
The voltage threshold is to distinguish the voltage between 13 V and 18V.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the new VOLT THRES.
10. Set the SCAN OFFSET. (Range : 0 - 90)
The scan offset is to offset the angle difference between the black marker on the
sub-reflector and the optical sensor.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the new SCAN OFFSET.
11. Set the USE WRS.
USE WRS is to determine whether the system uses WRS LEVEL or not.
USE WRS and WRS LEVEL are pair functions.
Press the UP and DOWN arrow keys to select “YES” to USE WRS or “NO” to NOT USE
WRS and press the OK key to set the USE WRS.
12. Set the WRS DETECT LEVEL. (Range : 10 – 5,000)
The WRS level is to set the WRS detection level.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the selected
character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the new WRS DETECT LEVEL.
V O L T T H R E S . S C A N O F F S E T
0 6 5 0 5 5
V O L T T H R E S . S C A N O F F S E T
0 6 5 0 5 5
U S E W R S W R S D E T E C T L E V E L
Y E S 0 4 0 0
U S E W R S W R S D E T E C T L E V E L
Y E S 0 4 0 0