Intellian t80W, Installation And Operation User Manual

Page: 36 / 143

t80W/t80Q – Marine Satellite TV Antenna System
36
Connecting the System Cables
The t80W is capable of receiving multiband and multi-polarization satellite TV
service around the globe using the Intellian WorldView
TM
LNB module.
The t80Q is optimized for European waters using by Universal Quad LNB has two
LO(9.75GHz, 10.6GHz) and the Universal Quad LNB module. It provides higher
optimized gain for especially European water.
Multi-Switch Connection
When you use the multi-switch in single LNB mode, you need to connect RF1 and
RF2 to the low-band (Horizontal Low and Vertical Low) outputs of the 4x8 multi-
switch and disable DisEqC function while connecting to a receiver other than a
European receiver. In Universal LNB mode, RF1~ RF4 can be connected to any
4 outputs of 4x8 multi-switch. However when you use the system for single LNB
mode, RF3 and RF4 ports will not transfer the RF signal.
RF1 RF2 RF3/RF4
13V 18V 13V+22kHz 18V+22kHz
Vertical Low Horizontal Low Vertical High Horizontal High
NOTE:
Intellian recommends connecting cables per the following configuration. If
you require a different configuration, contact the Intellian's service team for additional
assistance.